Some people really like being able to see the LED display on their remote controller, even though most of the data is also available in the DJI Go app on their tablet. This bracket holds the tablet above the RC so the display is visible.
I wasn't sure I was going to like this bracket when I first took it out of the box. It felt like flimsy plastic, and the latch mechanism for the part that goes around the RC didn't seem like it was strong enough to stay closed well.
I needn't have worried. Upon closer inspection, this isn't typical plastic. It feels more like nylon or some other high-strength plastic composite that lends extra strength to the bracket.
And once you put the RC in the bracket, the latch closes nice and tight. It won't come undone. And the tablet holder easily accommodates a 10.5-inch iPad Pro. A nylon neck lanyard also is included.
There are plenty of adjustments available so you can position your tablet exactly to your liking. You do need to make sure to tighten all the hinges well so the weight of the tablet won't cause them to slip. But once you do that, this bracket is very solid and about as well balanced as you could hope for.
The only real drawback: The bracket does make the 5D button on the controller difficult to use. I think I'll be able to fix this by drilling out the bottom corner of the bracket just slightly with a Dremel.
Overall, this tablet holder is lightweight and easy to use.
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card
Featured items you may like
Page 1 of 1 Start overPage 1 of 1
Product Description
Remote Controller Device Holder for DJI Mavic 2 Pro Mavic Mini, Zoom, Mavic Air, Spark, Mavic 1, Mavic Pro Enterprise
- DJI Mavic 2 Pro/Zoom Table Holder Adapter for 4-10 inch iPad, iPhone, Android, Samsung, Mobile Phone. Fit for your iPad Mini 4/3/2, iPad air 2/1, iPad Pro, Samsung Galaxy S2, S3, Note and any other tables size smaller than 10 inch.
- Easy to attach and detach within seconds - locks in place with a secure lanyard hook. Have screen on the top part of the transmitter instead of the bottom will never obfuscate or block your view of the information shown on the transmitter display.
- 3 Degrees of freedom with a 360 ball joint that allows full freedom in placing your screen for perfect flight visibility.
- Folds into a compact form factor for storage. Made of high impact ABS plastic made to take abuse without breaking.
- Compatible with the DJI Mavic 2 Pro/Zoom Mavic Air, Spark, Mavic 1 controller as well as your device. Comes with 1 tablet holder and lanyard.
- NOTE: Doesn't Compatible with Mavic Mini 2 and Air 2
Compatible with the DJI Mavic 2 Pro/Zoom Mavic Air, Spark, Mavic 1 controller as well as your device. Comes with 1 tablet holder and lanyard.
3 Degrees of freedom with a 360 ball joint that allows full freedom in placing your screen for perfect flight visibility.
Reviews with images
Solid alternative tablet bracket
Some people really like being able to see the LED display on their remote controller, even though most of the data is also available in the DJI Go app on their tablet. This bracket holds the tablet above the RC so the display is visible.I wasn't sure I was going to like this bracket when I first took it out of the box. It felt like flimsy plastic, and the latch mechanism for the part that goes around the RC didn't seem like it was strong enough to stay closed well.I needn't have worried. Upon closer inspection, this isn't typical plastic. It feels more like nylon or some other high-strength plastic composite that lends extra strength to the bracket.And once you put the RC in the bracket, the latch closes nice and tight. It won't come undone. And the tablet holder easily accommodates a 10.5-inch iPad Pro. A nylon neck lanyard also is included.There are plenty of adjustments available so you can position your tablet exactly to your liking. You do need to make sure to tighten all the hinges well so the weight of the tablet won't cause them to slip. But once you do that, this bracket is very solid and about as well balanced as you could hope for.The only real drawback: The bracket does make the 5D button on the controller difficult to use. I think I'll be able to fix this by drilling out the bottom corner of the bracket just slightly with a Dremel.Overall, this tablet holder is lightweight and easy to use.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 5, 2018
Some people really like being able to see the LED display on their remote controller, even though most of the data is also available in the DJI Go app on their tablet. This bracket holds the tablet above the RC so the display is visible.
I wasn't sure I was going to like this bracket when I first took it out of the box. It felt like flimsy plastic, and the latch mechanism for the part that goes around the RC didn't seem like it was strong enough to stay closed well.
I needn't have worried. Upon closer inspection, this isn't typical plastic. It feels more like nylon or some other high-strength plastic composite that lends extra strength to the bracket.
And once you put the RC in the bracket, the latch closes nice and tight. It won't come undone. And the tablet holder easily accommodates a 10.5-inch iPad Pro. A nylon neck lanyard also is included.
There are plenty of adjustments available so you can position your tablet exactly to your liking. You do need to make sure to tighten all the hinges well so the weight of the tablet won't cause them to slip. But once you do that, this bracket is very solid and about as well balanced as you could hope for.
The only real drawback: The bracket does make the 5D button on the controller difficult to use. I think I'll be able to fix this by drilling out the bottom corner of the bracket just slightly with a Dremel.
Overall, this tablet holder is lightweight and easy to use.
I wasn't sure I was going to like this bracket when I first took it out of the box. It felt like flimsy plastic, and the latch mechanism for the part that goes around the RC didn't seem like it was strong enough to stay closed well.
I needn't have worried. Upon closer inspection, this isn't typical plastic. It feels more like nylon or some other high-strength plastic composite that lends extra strength to the bracket.
And once you put the RC in the bracket, the latch closes nice and tight. It won't come undone. And the tablet holder easily accommodates a 10.5-inch iPad Pro. A nylon neck lanyard also is included.
There are plenty of adjustments available so you can position your tablet exactly to your liking. You do need to make sure to tighten all the hinges well so the weight of the tablet won't cause them to slip. But once you do that, this bracket is very solid and about as well balanced as you could hope for.
The only real drawback: The bracket does make the 5D button on the controller difficult to use. I think I'll be able to fix this by drilling out the bottom corner of the bracket just slightly with a Dremel.
Overall, this tablet holder is lightweight and easy to use.
Images in this review
Reviewed in the United States on March 14, 2018
Reviewed in the United States on March 21, 2018
Best tablet mount I have found for Mavic Pro controller
Reviewed in the United States on March 21, 2018
Most iPad/tablet attachments for Mavic Pro controller mount the tablet in front of the controller, where a cellphone would normally be attached. That blocks the view of the controller panel, buttons, and joysticks. That makes no sense to me. This attachment securely snaps around the controller body. The tablet is held above and behind the controller, so the pilot has full view of the controller screen, and all the buttons and joysticks. Variable adjustments let you position the tablet just where you want it. My only complaint, and thus 4 stars instead of 5, is that the product came with NO instructions on how to attach it to the controller. After fooling around for a few minutes, I figured it out (snaps around the controller with the snap toward you.) Even a single sheet with a couple of pictures or diagrams of how it attaches to the controller would have been helpful. Otherwise, it works great. The supplied lanyard is a must, as the controller with a tablet attached is somewhat unruly and heavy compared to using a cellphone, but the picture is much nicer.
Reviewed in the United States on March 21, 2018
Images in this review
Reviewed in the United States on February 21, 2018
Reviewed in the United States on October 7, 2019
Reviewed in the United States on March 22, 2018
Top reviews from other countries
Cliente de Amazon
El producto se ajustó al control sin ningún inconveniente
Reviewed in Mexico on September 9, 2021
Familie Schindelar-/-Krieger
Top Ergänzung für die Fernbedienung !
Reviewed in Germany on November 16, 2018Amazon Customer
Be aware of the size of your device
Reviewed in the United Kingdom on September 13, 2018